Tyres - Betamotor RR 350 Bedienungsanleitung

4

TYRES

Only fi t tyres approved by BETAMOTOR.
Unsuitable tyres can adversely affect the road holding of the vehicle.
• To protect your safety, immediately replace any damaged tyres.
• Slick tyres adversely affect the road holding of the vehicle, especially on wet roads
and in off-road riding.
• Insuffi cient pressure results in abnormal wear and overheating of the tyres.
• The front and rear tyres must have the same tread design.
• Always measure the infl ating pressures when the tyres are cold.
• Keep the tyre pressures within the prescribed range.
GB
50Nm
10Nm
Compress and release the fork 3-4 times.
Tighten the wheel bolt and the screws of
the foot-leg.
WARNING:
Tightening of the screws should be carried
out by adjusting the torque wrench to the
stability torque with repeated tightening
until stability torque has been achieved.
52