Instruments - SWM SILVER VASE 440 Kurzanleitung

INSTRUMENTS

WARNING AND SIGNALLING LIGHTS
1) Turning indicator light .
2) High-beam light .
3) Neutral warning light .
4) Engine failure warning light
5) Fuel reserve warning light
TURNING INDICATOR LIGHT" "
The light flashes when activating the left- or right-
hand turning indicator using the control lever on the
left-hand switch.
1
EN - 16
Quick_SilverVase-GranMilano_A000P00980_ed1_01-2016.indd 16
HIGH-BEAM LIGHT
The light comes on when activating the high-beam
light using the control on the left-hand switch.
NEUTRAL WARNING LIGHT
The light comes on when the gear shift lever is in
neutral position (no gear engaged).
ENGINE FAILURE WARNING LIGHT
.
When the ignition key is turned, the engine control
unit runs a self-test, the light comes on for a few
.
seconds and then goes off if no fault is found.
If the light comes on while the engine is running, it
means that there is an engine or injection system
failure.
- Stop and turn off the engine.
4
2
3
- Wait a few minutes and restart the engine; if the
light comes on again, contact your nearest SWM
dealer to have the self-test system checked.
FUEL RESERVE WARNING LIGHT
When the ignition key is turned, the light comes on
for a few seconds and then goes off.
If the light comes on while riding the motorcycle, it
means that the fuel has gone into reserve ( 3 litres)
and you need to refuel as soon as possible.
5
29/02/16 09:17