Yamaha RX-SL100RDS Bedienungsanleitung Seite 43

Speaker Set (Speaker set)
Use to manually adjust any speaker setting.
SOUND menu > Speaker Set >
SP Tone Control
HP Tone Control
Speaker Set
SP Distance
LFE Level
Center (Center speaker)
Choices: Large (large), Small (small), None (none)
• Select Large if you have a large center speaker. The
unit directs the entire range of the center channel signal
to the center speaker.
• Select Small if you have a small center speaker. The
unit directs the low-frequency signals of the center
channel to the speakers selected with "LFE/Bass Out".
• Select None if you do not have a center speaker. The
unit directs all of the center channel signal to the front
left and right speakers.
Front (Front speakers)
Choices: Large (large), Small (small)
• Select Large if you have large front speakers. The unit
directs the entire range of the front left and right
channel signals to the front left and right speakers.
• Select Small if you have small front speakers. The unit
directs the low-frequency signals of the front channel
to the speakers selected with "LFE/Bass Out".
Surround L/R (Surround left/right speakers)
Choices: Large (large), Small (small), None (none)
• Select Large if you have large surround left and right
speakers or if a rear subwoofer is connected to the
surround speakers. The entire range of the surround
channel signal is directed to the surround left and right
speakers.
• Select Small if you have small surround left and right
speakers. The low-frequency signals of the surround
channel are directed to the speakers selected with
"LFE/Bass Out".
• Select None if you do not have surround speakers. This
will set the unit to the Virtual CINEMA DSP mode (see
page 34) and automatically set the surround back
speaker setting (Surround Back below) to None.
Surround Back
LFE/Bass Out
Center
Front
Surround L/R
Surround Back (Surround back speaker)
Choices: Large (large), Small (small), None (none)
• Select Large if you have a large surround back speaker.
The unit directs the entire range of the surround back
channel signal to the surround back speaker.
• Select Small if you have a small surround back speaker.
The low-frequency signals of the surround back
channel are directed to the speakers selected with
"LFE/Bass Out", and the rest of the frequency signals
are directed to the surround back speaker.
• Select None if you do not have a surround back
speaker. The unit directs all of the surround back
channel signal to the surround left and right speakers.
LFE/Bass Out (Bass out)
Bass out signals carry low-frequency effects when this
unit decodes a Dolby Digital or DTS signal. The Low-
frequency signals can be directed to both front left and
right speakers, and to the subwoofer (subwoofer can be
used for both stereo reproduction and the sound field
program).
Choices: SWFR (subwoofer), FRONT (front), Both
• Select SWFR if you connect a subwoofer. The unit
directs all bass out and low-frequency signals to the
subwoofer.
• Select FRONT if you do not connect a subwoofer. The
unit directs all low-frequency and bass out signals to
the front speakers (even if you have previously set
Front to Small).
• Select Both to direct bass out signals to the subwoofer.
Other low-frequency signals are directed to both the
subwoofer and the other front channels in accordance
with your other speaker settings.
SET MENU
41