Using The Test Tone - Yamaha RX-SL100RDS Bedienungsanleitung

Using the test tone

You can use the test tone feature to manually balance your
speaker levels. Please note that this operation will override
the level adjustments made in the Speaker Level section of
BASIC setup (page 17). Use the test tone to set speaker
levels so that the volume from each speaker is identical
when heard from your listening position.
b
TITLE
LEVEL
CH
–
RETURN
1,4
TEST
TV VOL
DVD/CD
DTV/CBL
MUTE INPUT
TV MODE
1
Press TEST on the remote
control.
The unit will output a test tone.
2
Press k/n repeatedly on the remote control
to select the speaker you want to adjust.
TEST LEFT
TEST CENTER
TEST RIGHT
TEST R SUR.
TEST SUR. BACK
TEST L SUR.
TEST SUBWOOFER Subwoofer
3
Press l / h to adjust speaker volumes.
4
Press TEST when you have completed your
adjustment.
The test tone stops.
Note
You cannot enter test mode if headphones are connected to the
PHONES jack. Remove the headphones from the PHONES jack.
p a
MENU
SET MENU
ENTER CH
2,3
+
DISPLAY
VOLUME
MUTE
AMP
VCR VIDEO 1
TUNER VIDEO 2
– +
CH
RX-SL100RDS
RETURN
TEST
Front left speaker
Center speaker
Front right speaker
Surround right speaker
Surround back speaker
Surround left speaker
ADVANCED OPERATIONS
37