Yamaha RX-SL100RDS Bedienungsanleitung Seite 13

Speaker connections
AM ANT GND FM ANT
75Ω UNBAL
TUNER
OPTICAL COAXIAL
DIGITAL
INPUT
1 2 3
DVD DTV
VIDEO 1
/CD /CBL
• The surround back speaker outputs the surround back channel included in Dolby Digital EX and DTS-ES software and only
operates when the Dolby Digital EX or DTS-ES decoder is turned on.
FRONT terminals
Connect your speaker system to these terminals.
SURROUND terminals
Connect surround speakers to these terminals.
SURROUND BACK terminals
Connect a surround back speaker to these terminals.
CENTER terminals
Connect a center speaker to these terminals.
SUBWOOFER OUTPUT jack
Connect a subwoofer with built-in amplifier, such as the
YAMAHA Active Servo Processing Subwoofer System,
to this jack.
y
You can easily distinguish between the cable pairs by attaching a
supplied cable tag to each end of the respective speaker cable (see
page 9).
Notes
• The cut-off frequency for the SUBWOOFER jack is 90 Hz.
• If you are not using a subwoofer, allocate the signals to the front
left and right speakers by changing the setting item "LFE/Bass
Out" to FRONT on the SOUND menu.
• Use the control on the subwoofer to adjust its volume level. You
can also adjust the volume level using this unit's remote control
(see page 36).
Front
speakers
Subwoofer
system
Right
7 1
EXT. IN/OUT TV IN/OUT
OUTPUT
SUBWOOFER
Left Center
speaker
2 6 3
SPEAKERS FRONT CENTER SURROUND SURR BACK
R L R L
+ +
– –
6
2
SPEAKER SETUP
Surround
speakers
Surround back
speaker
Right Left
4
MAINS
1
7
3
4
5
Speaker layout
5
11