Herunterladen Inhalt Inhalt Diese Seite drucken

Datenübertragung; Serielle Schnittstelle; Data Transmission; Serial Interface - wtw MultiLine P4 Bedienungsanleitungen

Inhaltsverzeichnis

Werbung

Datenübertragung

Data transmission

Die Ausgabe von Kalibrierprotokollen
und Meßdatensätzen auf Drucker oder
Computer erfolgt über die serielle
Schnittstelle.

Serielle Schnittstelle

Seriellen Ausgang des Meß-
gerätes mit seriellem Anschluß
PC/Drucker verbinden.
PC:
Kabel AK 340/B,
Best.-Nr. 902 841
Drucker: Kabel AK 325/S,
Best.-Nr. 902 837
Belegung:
1 CTS
2 Steckercodierung + RxD
3 Masse
4 TxD
Verbinden von 2, 3 und
Anschluß eines PC/Drucker
aktiviert die serielle Ausgabe.
Übertragungsdaten am PC/Drucker
einstellen.
Baudrate:
Parität (nur PC):
Handshake:
Datenbits (nur PC): 8
Stopbit (nur PC):
Sparschaltung:
Das Gerät schaltet ca. 1 h nach der
letzten Tastenbetätigung automatisch ab.
Ausnahme:
Dauerbetrieb bei angeschlossenem
Schnittstellenkabel und/oder aktivierter
zeitgesteuerter Ausgabe.
Die Konfiguration der seriellen
Schnittstelle (Baudrate, zeitgesteuerte
Übertragung, Übertragung auf Tasten-
druck) entnehmen Sie dem Kapitel
"Konfiguration".
1200, 2400,
4800, 9600 wählbar
keine
RTS/CTS + Xon/Xoff
1
The output of calibration protocols and
measuring records to the printer or
computer is made via the serial interface.

Serial interface

Connect serial ouput of the
meter to serial connection of
the PC/printer.
PC:
Printer: Cable AK 325/S,
Connections:
1 CTS
1
2
2 Plug codification + RxD
3 Mass
4
3
4 TxD
Connecting 2, 3 and
connection of a PC/printer
activates the serial output.
Set transmission data at the PC/printer:
Baud rate:
Parität (PC only):
Handshake:
Data bits (PC only): 8
Stop bit (PC only): 1
Economy circuit:
The meter automatically switches itself off
approx. 1 h after the last key operation.
Exception:
Continuous operation with connected
interface cable and/or activated output .
For setup of the serial interface (Baud
rate, timed transmission, transmission on
keypressing) please refer to chapter
"Setup".
Cable AK 340/B,
Order no. 902 841
Order no. 902 837
1200, 2400,
4800, 9600 selectable
none
RTS/CTS + Xon/Xoff
41

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Multiline p3 ph/oxi setSentix 41Cellox 325Oxical-slMultiline p3 ph/oxiMultiline p3

Inhaltsverzeichnis