Operation
NOTE
►
Every press of a button is acknowledged with a beep .
Standby mode
The appliance automatically switches to standby mode and the display 5 shows
the time if no button is pressed for a long time .
Setting the clock
After plugging in the appliance, the display 5 shows 1:00 .
♦
Press and hold the timer/clock button 8
appears on the display 5 ("H":"Hour") .
♦
Turn the dial 9 to select the desired mode:
–
"Hr 24", the clock displays the time in 24-hour mode .
or
–
"Hr 12", the clock displays the time in 12-hour mode .
♦
Confirm your selection by pressing the dial 9 .
♦
Turn the dial 9 to set the hours . The hour display flashes . Confirm your
selection by pressing the dial 9 .
♦
Turn the dial 9 to set the minutes . The minute display flashes .
Confirm your selection by pressing the dial 9 .
The time is now set .
Setting the timer
The appliance has a timer that you can use independently of microwave operation .
♦
Press the timer/clock button 8
This works during standby mode as well as during operation .
00:00 and the
♦
Set the desired time using the dial 9 .
You can set a time from 10 seconds to 95 minutes .
The increments for setting the time are as follows:
–
from 0 sec to 5 min: in 10-second increments
–
from 5 to 10 min: in 30-second increments
–
from 10 to 30 min: in 1-minute increments
–
from 30 to 95 min: in 5-minute increments
SMWC 700 A1
to activate the timer .
symbol appear on the display 5 .
for a few seconds . "12 H"
GB │ IE
│
43
■