Sony VGP-BRMP10 Bedienungsanleitung Seite 53

Symptom
The controller is not
found when the
Bluetooth device
search is performed.
The Found New
Hardware wizard
screen appears when
connecting.
The Found New
Hardware wizard
screen appears when
starting or restarting
the personal computer.
I am asked to input a
key at the time of
authentication.
In the "Mouse
Properties" dialog of
the "Control Panel",
the touchpad's setting
you have changed is
not reflected.
Tapping operation
functions equivalent to
performing a right
click.
Cause/Remedy
• The controller is unable to be detected.
c Press the CONNECT button on the controller, and
then try the search again.
• The power switch on the controller is set to OFF.
c Check the power switch setting of the controller.
• This wizard may appear if you have three or more HID
Profile-compatible devices (such as a Bluetooth
mouse, keyboard, and this controller) registered on the
personal computer.
c Follow the wizard's instructions.
c Follow the wizard's instructions.
c Input "0000" in the dialog, then click "Next".
c Though the touchpad's setting can be changed in the
"Mouse Properties" dialog of the "Control Panel" in
some computers, it is for the setting of the personal
computer's touchpad but not this unit.
• The functions of the left and right buttons are switched
in the "Mouse Properties" dialog.
c Though the functions of the left and right buttons
can be switched in the "Mouse Properties" dialog of
the "Control Panel" in some personal computers, do
not switch them.
c Disable the tapping feature. For details, see
"Enabling or disabling the scrolling and tapping
features" (page 14).
GB
25