Instruction For Use; Timer Mode - Vortice VORT PROMETEO HR 400 Betriebsanleitung

ENGLISH
Additional RF device
An additional radiofrequency (RF) device, including a
connection cable is available as an option, and allows
the control of the apparatus even if the position chosen
for its installation is screened from radio waves.
(fig.20)
20 20

Instruction for use

Instructions on how to use the remote control:
Insert the batteries (fig.21);
21 21
IMPORTANT
After a certain period of inactivity, the remote control will
go into "pause" mode. To reactivate it, press and hold
down one of the buttons.
ON/OFF button (fig.22)
22 22
14:38
DISPLAY
SET
Enables the appliance to be turned on and off. The
command is performed only if the button is pressed for
at least 0.5 seconds. With the appliance off the time and
day of the week are displayed. This function may be
disabled. On turning the appliance on the AUTO mode
is activated at a speed of V min .
SET button (fig.23)
23 23
14:38
DISPLAY
SET
Sets the following parameters. To move from one
parameter to the next, press NEXT.
MAN
Fr
SUMMER

TIMER MODE

NEXT ENTER
AUTO
Fr
TIMER MODE
NEXT ENTER
29