oventrop R-Tronic Schnellinbetriebnahme Seite 2

EN
Wireless thermostat (R-Tronic)
Display
Menu-button
(Turn + Press)
Radio communication and adjustment of an actuator:
STEP 1: AKTOR
STEP 2:
R-TRONIC
STEP 3:
R-TRONIC
R-TRONIC
STEP 4:
STEP 5: AKTOR
STEP 6: AKTOR
AKTOR
STEP 7:
NOTE:
If you do not succeed in creating a radio communication, this can be due to spatial factors
(geometry, existing objects, interference sources). In this case, the wireless thermostat should
be installed at a more favourable location and the "teach in" process should be repeated.
Installation must only be carried out by a qualifi ed tradesman with due consideration of
chapter 4 in the detailed installation and operating instructions.
QUICK START
"R-Tronic" Climate display device/control
Remove the casing cover of the actuator (mounted onto radiator)
Set date and time (R-Tronic energized)
Call up "teach in" menu (turn and press Menu-button)
MAIN MENU  SETTINGS  INSTALLATION  TEACH IN
Start "teach in" process (press menu-button)  30 sec. "Count down" is running
TEACHIN
Press button shortly (within 30 sec.!)
 LED 2 will fl ash red continuously
 Display will show CALIBRATION REQUIRED
Calibrate valve by pressing the button (for at least 2 sec.) until the
LEDs 1 + 2 will fl ash green shortly  Calibration starts
 LED 1 + 2: triple green fl ashing (calibration terminated successfully)
Mount casing cover until it engages audibly.
Subject to technical modifi cations without notice. 115068281 07/2015 (V 2.0)
Actuator for wireless thermostats (Aktor)
+
Button
Oventrop GmbH & Co. KG Paul-Oventrop-Straße 1 D-59939 Olsberg
Valves, controls + systems
Aktor Casing cover
LED 1
VIDEO:
LED 2