General Indications For Installation And Operation - Comelit MT KIT 08 Technische Anleitung

GROUP S.P .A.

GENERAL INDICATIONS FOR INSTALLATION AND OPERATION

This section of the manual contains all the information relating to installation of the GENIUS KIT system. The maximum total distance between the external unit and
the furthest monitor is 400 m.
power supply 1205/B or 1395 and
Cable section or type
Two-wire cable (cross-sect. 0.5 mm 2 Ø
0.8 mm AWG 20)**
Two-wire cable (cross-sect. 1 mm 2 Ø
1.2 mm AWG 17)**
Two-wire cable (cross-sect. 1.5 mm 2 Ø
1.4 mm AWG 15)**
Two-wire cable (cross-sect. 2.5 mm 2 Ø
1.8 mm AWG 13)**
Twisted telephone cable (cross-
2
sect. 0.28 mm Ø 0.6 mm AWG
23)*
Braided and shielded cable (cross-
sect. 1 mm 2 Ø 1.2 mm AWG 17)*
UTP5 Cat 5 AWG 24 (cross-sect.
2
0.2 mm Ø 0.5 mm)*
Comelit cable Art. 4576 and Art. 4578
2
(cross-sect. 0.5 mm Ø 0.8 mm AWG
20)*
* In case of multipaired cable, it is advisable to use one pair only for the system.
If necessary to reduce voltage drop, due to long distances, it is possible to use a pair as a single core.
** In case of multicore cable, it is necessary to use only two of the available wires.We recommend not to double up on the conductors.
MT KIT 08 14
Maximum distance between Maximum distance between
power supply 1205/B or 1212/B
external unit 4880 and 4881
A/G
20 m
(65 ft)
40 m
(130 ft)
60 m
(195 ft)
100 m
(325 ft)
Maximum distance between
external unit 4880 or 4881 and
the furthest 4833/A or 1214/2.
and powered monitor Maximum distance between
4833/A and the furthest 1214/2
B/E
25 m
(85 ft)
50 m
(165 ft)
100 m
(325 ft)
150 m
(495 ft)
Maximum distance between
monitor and 1214/2
C/F
150 m 40 m
(495 ft) (130 ft)
150 m 40 m
(495 ft) (130 ft)
150 m 40 m
(495 ft) (130 ft)
150 m 40 m
(495 ft) (130 ft)
100 m 20 m
(325 ft) (65 ft)
150 m 40 m
(495 ft) (130 ft)
150 m 50 m
(495 ft) (165 ft)
D