Declaration Of Conformity; Operation - TESTBOY 105 Bedienungsanleitung

Operation

Certificate of quality
All aspects of the activities carried out by Testboy GmbH relating to quality during the manufac-
turing process are monitored permanently within the framework of a Quality Management Sys-
tem. Furthermore, Testboy GmbH confirms that the testing equipment and instruments used dur-
ing the calibration process are subject to a permanent inspection process.

Declaration of Conformity

The product conforms to the present directives. For more detailed information, go to
www.testboy.de
Operation
Thank you for choosing a Testboy
Non-contact voltage tester from 12 V AC
|
High Performance LED Flashlight
|
| Vibrates if voltage is detected.
Audible warning tone
|
Non-contact voltage test
The Testboy 105 is capable of detecting wires carrying live
®
voltages using its built-in circuits in its tip.
If an alternating voltage of > 110 V AC is detected, the
white cap will glow red (refer to Figure Point 1a) the
instrument will vibrate and a warning signal will sound.
To detect voltages under 110 V AC, turn the flashlight on
using the switch (1b).
Now voltages from 12 V AC can be detected.
A flowing current is not required!
Check the voltage tester before use against a known voltage supply (e.g. a power
socket) to ensure that it is working correctly.
12
105.
®
®
Testboy 105