inshape 17408 Gebrauchsanweisung Seite 44

The computer's buttons
Button
Mode/
Enter/Up/
Down
Reset
GB
Recovery
Custom training session (G1)
Select the G1 function using the Mode/
Enter/Up/Down button.
Set the training parameters (training time,
distance, calorie consumption or maximum
pulse) by turning the button clockwise
or anticlockwise. Confi rm by pressing the
button.
Start exercising. When one of the
parameters is reached (for example, the
training time is over), the computer beeps.
Note! If you set a maximum pulse and your
pulse exceeds this value, the computer
beeps.
44
Function
Selects the display,
changes and confi rms
settings for the training
parameters (training
time, distance, calorie
consumption, maximum
pulse)
Resets the values for the
training session
Used to measure the
recovery pulse (only if
the pulse is already being
measured)
Racing against the computer (G2-G4)
Select the G2, G3 or G4 function using the
Mode/Enter/Up/Down button.
The training time is automatically set to
20 minutes and you must race against the
computer. The race progress is shown with
the cyclist icons on the display.
If you have kept up with the computer for
at least 60% of the time, once the time is
up, you win and "U-Win" is shown on the
display. If not, the computer wins and "P-
Win" is shown on the display.
The computer's displays
While exercising, press the Mode button to
change between the computer's various
displays.
Display Function
RPM Displays rpm
Speed Displays the current speed
Time Displays the time spent
on, or measures the time
for, the current exercise
session
Distance Displays the distance
covered in the current
exercise session
Calories Shows the estimated
calorie consumption
for the current exercise
session