Setting The Volume; Call Screening - switel DFT727 Bedienungsanleitung

Answering Machine

Setting the volume

The volume of the operator guidance can be set to one of 6 levels.
Via the base station:
y or z
Via the handset:
+ or ,
Setting the number of rings (delay)
You can select from 2 to 8 ringing tones or the Time Saver setting for pre-remote
access free of charge.
The free pre-remote access function enables you to determine whether new
messages have been left on your answering machine.
If new message have been recorded on your answering machine, your call is
S
taken after 2 rings.
If no messages have been recorded, the call is taken after 6 rings. Replace
S
the receiver before the 6th ring. No charges are accrued.
Via the Answer Settings menu:
+ or ,
Antw-Verzögerung , Ok
+ or ,
e.g.: Spar-Modus , Ok
Further information on remote access is provided on . Page 142

Call screening

You can listen-in to the caller without actually taking the call.
Höre
Ende
Taking a call being recorded
It is possible to take a call even if the answering machine has already begun to
take it. Recording of the message is stopped in this case.
138
Set the volume
Set the volume
Select the function and confirm
Select the setting and confirm
Activate the call screening function
Deactivate the call screening function
Take the call