In The Case Of Problems - switel DFT727 Bedienungsanleitung

Problems
The batteries are
empty in a short
time
1
The CLIP function
does not work
The answering ma-
chine no longer
records messages/
memos
No remote access
functions can be
executed
1
CLIP: Calling Line Identification Presentation

In the Case of Problems

Solutions
- Batteries are empty or defective.
- Place the handset in the base station properly. Clean
the contact surfaces on the handset and base station
with a soft, dry cloth.
- Place the handset in the base station for 16 hours.
- The caller number display function is an optional
service offered by telephone network providers. Con-
tact your network provider for further information.
- The caller has suppressed the transmission of their
phone number.
- Ensure that the answering machine is connected
correctly and switched on.
- Check whether the answering machine memory is
full. Delete messages from the memory, if necessary.
. Page 140
- Check that the correct PIN code has been entered
for the remote access. . Page 142
- The telephone used for remote access must be set
to tone dialling.
157