Changing The System Pin; Resetting The Default Settings - switel CD7702 Bedienungsanleitung

14.5

Changing the system PIN

1. Press the < button.
2. Use the - or + button to select the Base settings" option in the display.
3. Press the < button. Several options appear in the display.
4. Use the - or + button to select the System PIN" option.
5. Press the < button. The message Enter old PIN" appears in the display.
6. Enter the old PIN (default setting: 0000). A
entered. If you enter an incorrect digit, delete it by pressing the > button.
7. When the old PIN has been correctly entered, press the < button. The message Enter new PIN"
appears.
8. Enter a new PIN (max. 8 digits possible).
9. Press the < button. The message Confirm new PIN" appears.
10. Enter the new PIN once again.
11. Press the < button. The assignment is confirmed in the display.
NOTE: If you forget your PIN code, reset the telephone to its default settings (refer to Section 14.6).
12. Press the > button to move back one menu level at a time.
14.6

Resetting the default settings

NOTE: After resetting the telephone to its default, factory settings, all the data entered is deleted.
1. Press the ) button for 2 seconds. The handset is switched off.
2. Press the ) button for 2 seconds. The handset is switched on.
3. Press the * button before the start screen appears in the display.
4. The message Default settings" appears in the display.
5. Press the < button. An acoustic signal is issued by the base station and handset as confirmation.
The telephone is then in the state it was in on delivery.
− Base Station Settings −
" appears in the display instead of the number actually
*
119