Sending Saved Sms Messages; Reading And Answering; Sms Alert Signal On/Off - switel CD7702 Bedienungsanleitung

3. Press the < button.
4. Use the - or + button to select the Write Message" option in the display.
5. Press the < button. Enter the text using the digit keys. A maximum of 160 characters are possible.
NOTE: Refer to 8.1.1 to enter text.
To enter a symbol, press the < button while entering the text. Use the - or + button to select the
NOTE:
Insert Symbol" option in the display. Press the < button. Use the - or + button to select the
required symbol. Press the < button. The text entry display reappears. Carry on entering your text.
6. Press the < button.
7. Use the - or + button to select the Send to" option in the display.
NOTE: If you want to send the text message later, select the Save" option under Step 7. The text message is
stored in the Outbox" list.
8. Press the < button.
9. Enter the phone number of the receiving party.
If the receiving party is stored in the phone book, press the < button. Use the - or + button to
select the required name and then press the < button. Continue with Step 10.
10. Press the < button. Sending of the message is confirmed in the display.
9.3

Sending saved SMS messages

1. Press the < button twice.
2. Use the - or + button to select the Outbox" option in the display.
3. Press the < button.
4. Use the - or + button to select the required SMS message in the display.
5. Press the < button twice.
6. Use the - or + button to select the Send to" option in the display.
7. Press the < button.
8. Enter the phone number of the receiving party and then press the < button.
9.4

Reading and answering

When an SMS message is received, an acoustic signal is issued and the display indicates the receipt of a new
message.
1. Press the < button. The inbox list appears in the display. SMS messages which have not been read
are marked by a star.
If you want to reply to an SMS message which has already been read, press the < button twice, use
NOTE:
the - or + button to select the Inbox" option in the display and press the < button. Continue with
Step 2.
2. Use the - or + button to select the required SMS message in the display.
3. Press the < button. The SMS message appears in the display.
4. Press the < button.
5. Use the - or + button to select the Reply" option in the display.
Select the Forward" option to forward the SMS message to another phone. To forward the text
message, proceed with Step 8.
6. Press the < button. Enter the text using the digit keys. A maximum of 160 characters are possible.
NOTE: Refer to 8.1.1 to enter text.
7. Press the < button.
8. Use the - or + button to select the Send to" option in the display.
9. Press the < button.
10. Enter the phone number of the receiving party.
If the receiving party is stored in the phone book, press the < button. Use the - or + button to
select the required name and then press the < button.
11. Press the < button. Sending of the message is confirmed in the display.
9.5

SMS alert signal on/off

1. Press the < button.
2. Use the - or + button to select the SMS" option in the display.
3. Press the < button.
4. Use the - or + button to select the Settings" option in the display.
5. Press the < button.
6. Use the - or + button to select the SMS Alert" option in the display.
7. Press the < button.
8. Use the - or + button to select the On" or Off" option in the display.
9. Press the < button.
10. Press the > button to move back one menu level at a time.
108
− SMS Text Messages −