Falling Asleep And Waking Up With The Sonorohifi; Setting The Alarm - Sonoro SO-510 Bedienungsanleitung

7 Falling asleep and waking up with
the sonoroHIFI
You can use the device to wake up with FM/DAB
radio, CD, Relax Music or alarm ringtones.
7.1

Setting the alarm

The alarm functions can be used both in standby
mode and when the device is on. The Alarm menu
takes you through the following steps: Setting the
→ Setting the alarm source → Setting the
alarm time
→ Setting the alarm repetition fre‐
alarm volume
quency.
i
If you do not enter any information for approx. 10
seconds when setting the alarm, the setting screen
closes without saving your settings.
Setting the alarm time
1. Press and hold
ð The display shows the „Set Alarm 1 Time"
setting
2. Press .
ð You are now in the „Set Alarm 1 Time" setting.
The hour display flashes.
3. Turn until the display shows the correct
hour.
4. Press to confirm the hour.
ð The minute display flashes.
5. Turn until the display shows the correct
minute.
106
or .
6. Press to confirm the minute.
ð The alarm time is set. The display shows the
alarm source „Ringtone" .
i
Use the
tons to switch between the hours and
minutes displays.
Setting the alarm source
7. Turn to select the alarm source.
FM Select an FM station preset from
the station memory that you
wish to start the device with and
wake up to.
DAB Select a DAB station preset from
the station memory that you
wish to start the device with and
wake up to.
CD Select a track from the CD you
wish to start the device with and
wake up to.
Relax Music Select a Relax Music track from
the memory that you wish to
start the device with and wake
up to.
Ringtone Select a ringtone from the
memory that you wish to start
the device with and wake up to.
Beep
Awakening
Bird
Guitar
Piano
Xylophone
8. Press to confirm the selected alarm source.
ð The alarm source is set. The display shows
the alarm volume under „Alarm Volume" .
Setting the alarm volume
9. Adjust the volume from 1 – 32 by turning
and or and
© sonoro audio GmbH 2016
but‐
.