Maintenance And Cleaning; Appendix - Futurelight Scan H - 150 Bedienungsanleitung

6. Maintenance and cleaning

It is absolutely essential that the projector is kept clean and that dust, dirt and smoke fluid residues must not build
up on or within the projector. If this happens, the light output from the projector will be significantly reduced.
Regular cleaning will not only ensure the maximum light output, but will also allow the projector to function reliably
throughout its life. A soft lint-free cloth moistened with any good glass cleaning fluid is recommended, under no
circumstances should alcohol or solvents be used!
Danger !
Disconnect from the mains before commencing any maintenance work
The front mirror and objective lens will require a weekly cleaning as smoke fluid has a tendency to build up
residues, reducing the light output very quickly. The cooling fan should be cleaned monthly.
The gobos may be cleaned with a soft brush.The interior of the projector should be cleaned at least annually using
a vacuum cleaner or air jet.
The dichroic colour filters, the gobo wheel and the internal lenses should be cleaned monthly.

7. Appendix

We hope you will enjoy your Scan H-150. We can assure you, that if you follow the instructions given in this
manual, you will enjoy this device for a long period of time.If you should have further questions, do not hesitate to
contact your local dealer.
1/99 ©
1 6