Projector Addressing (For Digital Signals); Technical Specifications - Futurelight Scan H - 150 Bedienungsanleitung

4.2 Projector addressing (for digital signals)

Each projector occupies 4 channels. To ensure that the control signals are properly directed to each projector, the
projector requires adressing. This is to be done for every single projector by changing the DIP switches (10) as set
out in this table. Use the pan and tilt switches in order to invert these two movements.
Power supply
Power supply
Power consumption:
Fuse:
Lamp
EFR 15V/150W with reflector
- Socket: GZ-6.35
- Lamp life: 50 hours
- Diameter 50mm with reflector
Motor
- 3 microstepping stepper motors controlled by microprocessor
Electronics
- Digital serial input DMX 512
- 4 Control channels:
Channel 1 : Horizontal mirror movement
Channel 2 : Vertical mirror movement
Channel 3 : Cooling fan
Channel 4 : Gobo-/Colourwheel
Housing
- Easy access to lamp and main components thanks to large opening cover
Dimensions and weight
- L x W x H : 435 x 162 x 162mm (without handle)
- L x W x H : 435 x 230 x 300mm (with handle)
- Weight : 6.8kg
Please note: All specifications are subject to change withour prior notice.
Errors and omissions excepted.
DIP switch settings
Projector No. & Channels
Projector 1 - Channels 1-4
Projector 2 - Channels 5-8
Projector 3 - Channels 9-12
Projector 4 - Channels 13-16

5. Technical Specifications

230V / 50 Hz
200W
T1,25A
On
Off
On
Off
On
Off
On
Off
1 5