Mounting The Measuring Device; Required Tools; Post-Installation Check - Endress+Hauser FTW33 Betriebsanleitung

Installation
 11 Flush-mounted installation for highly viscous media
5.2

Mounting the measuring device

5.2.1

Required tools

Open-ended wrench or socket wrench 32 AF
– When screwing in, turn by the hex bolt only.
– Torque: 15 to 30 Nm (11 to 22 lbf ft)
5.2.2 Installation
A
A Thread G ½"
B Thread G ¾"
C Thread M24x1.5
5.3

Post-installation check

 Is the device undamaged (visual inspection)?
 Is the device adequately protected from wet conditions and direct sunlight?
 Is the device properly secured?
32
B
32 mm
C
32 mm
Liquipoint FTW33
A0025915
32 mm
A0021389
Endress+Hauser