Maintenance; Cleaning; Repairs; Return - Endress+Hauser FTW33 Betriebsanleitung

Liquipoint FTW33
9

Maintenance

No special maintenance work is required.
9.1

Cleaning

The sensor must be cleaned if necessary. Cleaning can also be done while it is installed (e.g.
CIP Cleaning in Place / SIP Sterilization in Place). Care must be taken to ensure that no
damage occurs to the sensor in the process.
10

Repairs

Repair is not envisaged for this measuring device.
10.1

Return

The measuring device must be returned if the wrong device has been ordered or delivered. As
an ISO-certified company and also due to legal regulations, Endress+Hauser is obliged to
follow certain procedures when handling any returned products that have been in contact
with medium. To ensure safe, swift and professional device returns, please refer to the
procedure and conditions for returning devices provided on the Endress+Hauser website at
http://www.endress.com/support/return-material
10.2

Disposal

When disposing, separate and recycle the device components based on the materials.
11

Accessories

Description
Test magnet
Socket wrench, hex bolt, 32 AF
Plug-in jack M12, IP69K
Coupling nut (316L)
Plug-in jack M12 IP67
Coupling nut (Cu Sn/Ni)
Process adapter M24x1.5, weld-in adapter, slotted nut and seals
Detailed information on accessories can be found in the technical documentation
TI01028F/00/EN.
Endress+Hauser
Elbowed 90° with LED
Elbowed 90°
Elbowed 90°
Even
Maintenance
Order number
71267011
52010156
52018763
52024216
52010285
52006263
see TI00426F/00/EN
41