Installation; Installation Conditions - Endress+Hauser FTW33 Betriebsanleitung

Liquipoint FTW33
5

Installation

5.1

Installation conditions

The measuring device can be installed in any position in a vessel, pipe or tank. Using a socket
wrench, the measuring device can also be installed at measuring points that are difficult to
access.
The socket wrench 32 AF is optionally available to order →  41.
 9 Installation examples
1 Overfill protection or upper level detection (MAX)
2 Pump dry running protection (MIN)
3 Lower level detection (MIN)
In horizontal pipes:
Vertical orientation can affect the measurement. It can be influenced by the fact that the
sensor is not completely covered with liquid or by air bubbles at the sensor.
 10 Mounting position in horizontal pipes
Endress+Hauser
3
Installation
1
2
A0016816
A0016834
31