General Standards - AERMEC TRA 50 Technische Bedienungs- Und Installationsanleitung

This manual, supplied
together with the unit,
must be kept in a dry place
for future consultation if
required.
• IT HAS been drawn up with the aim
of supporting the correct installation
of the unit and providing all the
indications for the correct use and
maintenance of the device. Before
proceeding with the installation,
please read all the information in
the manual carefully as well as the
procedures necessary for the correct
installation and use of the unit.
• We recommend you stick carefully to
the manual and also comply with the
safety regulations currently in force.
• The device must be installed in
compliance with the local legislation
currently in force in the country of
destination.
• Unauthorised electrical and
mechanical tampering with the
device will render the WARRANTY
NULL AND VOID.
• The cooling towers have an
identification plate on the outside at
the point of the water feed connection.
This plate shows machine operating
technical data, as well as the year of
manufacture and the ID registration no.
(Fig. 01).
Th e r e g i s t ra t i o n n o . m u s t b e
communicated to AERMEC should
spare parts or after-sales assistance be
requested.
• Check the electrical characteristics
on the registration plate. Read the
instructions in the specifi c section
about electrical connections.
• If the unit needs to be repaired,
in all cases contact a specialised
AERMEC after sales centre or persons
authorised by the same and only use
OEM spare parts.
• The manufacturer furthermore
declines any liability for any injury to
persons or damage to things resulting
from the failure to comply with the
information in this manual.
• Any use other than that permitted
or outside the operating limits
mentioned in this manual is forbidden

General standards

if not previously agreed with the
company. The warranty does not
include payment for damage due to
wrong installation of the unit by the
installer.
• The guarantee does not cover
payment for damages cause by the
improper use of the unit by the user.
• The manufacturer is not responsible
for accidents to the installer or user
that are due to the improper use and
incorrect installation of the unit.
•The device must be installed in such
a way that maintenance and/or
repair operations can be carried out.
The warranty of the device does not
in any case cover costs incurred
as a result of motorised ladders,
scaffolding or any other lifting
systems made necessary to carry out
the operations under warranty.
The warranty is not valid when:
• the maintenance and repairs have
been performed by unauthorised
persons or companies;
• the unit has been previously repaired
or modifi ed with spare parts that are
not original;
• the unit has not undergone suitable
maintenance;
• the instructions described in the
present manual have not been
followed correctly;
• unauthorised modifi cations have
been made.
N.B.:
The Manufacturer reserves the right at
all times to make any modifi cation for
the improvement of its product and is
not obliged to add these modifi cation
to machines of previous manufacture
that have already been delivered or are
being built.
The warranty conditions are any
subject to the general sales conditions
at the moment the contract is fi nalised.
fig.01
5