Technical Data; Function Of The Unit; Overview (A) - Rothenberger ROWELD P 125 Bedienungsanleitung

Do not accelerate the cooling process of the electrical device by immersing it in liquid. There is a
danger of injury from electric shock and/or sudden spurting of the liquid. The electrical device
will also be damaged.
Place the electrical device down only on its supporting stand, in the table clamp or on a fire-
retardant base. Placing the hot electrical device on a base which is not fire-retardant or in the vi-
cinity of inflammable material can damage the surface and/or cause a fire.
Only use approved and appropriately marked extension leads with a sufficient cable cross-
section. Use extension leads up to a length of 10 m with cable cross-section 1.5 mm², from 10 –
30 m with cable cross-section 2.5 mm².
Check the power cable of the electrical device and the extension leads regularly for damage.
Have these renewed by qualified experts or an authorized ROTHENBERGER customer service
workshop in case of damage.
This device is not intended for use by children and persons with
physical, sensory or mental limitations or a lack of experience or
knowledge. This device can be used by children aged 8 and
above and by persons who have physical, sensory or mental lim-
itations or a lack of experience or knowledge if a person respon-
sible for their safety supervises them or has instructed them in
the safe operation of the device and they understand the associ-
ated dangers. Otherwise, there is a danger of operating errors and
injuries.
Supervise children during use, cleaning and maintenance. This
will ensure that children do not play with the device.
2

Technical Data

Power supply .................................. 230V AC / 115V AC, 50/60 Hz, 1300 W
Working range ................................ Ø 16-125mm
Dimensions ..................................... 500x200x65mm
Weight ............................................ 3,1 kg
Protection type ................................ IP 20
3

Function of the Unit

3.1 Overview
1 Isolated Handle
2 Flex with Plug
3 Pushbutton
"+" / "-" button
4
red diode "Stand by"
5
The handy pipe socket welding machines are designed fort he overlap welding of PE, PP and
PVDF plastic pipes and shaped pieces in a workshop and on sites.
There are two methods of welding: type A und type B.
Using method A the pipe is used without peeling, it is simply chamfered.
Using method B the pipe must be peeled to a certain length and then chamfered.
The ROTHENBERGER heating jacks (8) and -arbours (9) are designed in form A and are
marked accordingly on the uncoated rear.
14
6 temperature indicator
7 Heating plate
8 Heating jack
9
Heating arbours
10
Counter pin
ENGLISH
(A)