Putting Out Of Operation; General Requirements; Care And Maintenance; Accessories - Rothenberger ROWELD P 125 Bedienungsanleitung

3.2.4

Putting out of operation

 Switch off heating element and pull power plug from the socket.
 For safty storage and transportation the machine can be kept in a crate (no. 55555).
The hotplate must be cooled off!
3.3

General requirements

Because weather and environmental influences have a decisive impact on welding, the corre-
sponding specifications in the DVS guidelines 2207 Part 1, 11 and 15 must be observed uncon-
ditionally. Outside Germany the corresponding national guidelines shall apply.
(The welding work must be monitored constantly and carefully!)
4

Care and Maintenance

Check the heating arbour and jack for signs of damage. If they are damaged they must be re-
coated. Material residue is to be removed with non-fibrous paper and methylated spirits.
The heating element may only be supplied with the voltage specified on the type plate.
If the mains cable is damaged it must be replaced with a special cable H 05 RR-F.
Do not use any cleaning products which contain solvents to clean the machine since they may
damage the plastic parts.
It is recommendable to have repairs done only by a service workshop or by
the manufacturer!
5

Accessories

Accessory Name
Butt Fusion Set ROWELD P125 (= 2 pcs.)
Cylinder head screw DIN912 M6x40
Table Clamp
Floor Stand
Tighten Pin
Allen key DIN 911 SW 5
Steel Case
Spare parts
6

Customer service

The ROTHENBERGER service locations are available to help you (see listing in catalog or on-
line) and replacement parts and service are also available through these same service locations.
Order your accessories and spare parts from your specialist retailer or using RoService+ online:
+ 49 (0) 61 95 / 800 – 8200
Phone:
+ 49 (0) 61 95 / 800 – 7491
Fax:
Email: service@rothenberger.com
www.rothenberger.com
18
ROTHENBERGER Part Number
55536
L81357
55524
55539
55549
321215
55555
www.rothenberger.com
ENGLISH