Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8.5
Accepting calls automatically
Incoming calls are accepted automatically when you lift the receiver from the base station. If
you only want calls to be accepted by means of the
automatic acceptance facility.
1.
Press the menu button
2.
Select the HANDSET menu with
3.
Select the AUTO ANSWER function with
4.
Select ON or OFF with
5.
Now select further menu functions or exit the menu by pressing and holding the
button.
8.6
Tone (TD) or pulse (PD) dialling
This feature enables you to use your telephone both on analogue exchanges (PD) and on
the new digital exchanges (TD). The factory setting is TONE dialling.
1.
Press the menu button
2.
Select the SETUP menu with
3.
Select the DIAL MODE function with
4.
Select the required dialling mode with
5.
Now select further menu functions or exit the menu by pressing and holding the
button.
8.7
Changing display names
In normal operation, the message "DECT8048" appears in the display. If you have logged
on several handsets to one base station, it can be useful to give each handset its own
name. The number after the name shows with which number the handset can be called
internally.
1.
Press the menu button
2.
Select the HANDSET menu with
3.
Select the NAME function with
4.
Now enter the required name using the number pad. Letters already entered can be
deleted by repeatedly pressing the
5.
Confirm with
6.
Now select further menu functions or exit the menu by pressing and holding the
button.
58
- Special functions -
.
and
and
and confirm with
.
and
.
and
and
.
button, you can deactivate the
and confirm with
and
and confirm with
.
and confirm with
and
and confirm with
and
and confirm with
confirm with
and confirm with
button.
.
.
.
.
.
.
.
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
