How To Disassemble The Appliance; How To Assemble The Appliance - Rommelsbacher EGS 80 Bedienungsanleitung

1.) How to disassemble the appliance

Pay attention that
the mains plug is
disconnected from
the socket.
Grasp the cutting
blade holder at the
holding device and
unlock by slightly tur-
ning it into direction
'OPEN'.

2.) How to assemble the appliance

Pay attention that
the mains plug is
disconnected from
the socket.
Take off the base unit
from the collecting
container.
Carefully remove the
cutting insert holder.
Select a cutting insert,
grasp it at both sides
and fi t it on the cut-
ting insert holder.
Remove the pusher
from the feed chute.
In order to remove
the cutting insert,
press the latching
nose to the inside
with your thumb ...
Push the cutting insert
downwards ...
Unlock the feed
chute by turning it
to the left into the
direction 'open lock'.
... and carefully push
the cutting insert
upwards.
... until the latching
nose locks into
place.
Remove the feed
chute.
For a complete remo-
val, grasp the cutting
insert at both sides
and carefully push it
upwards.
Grasp the cutting
insert holder at the
holding device and fi t
it into the base unit.
(This can be done in
3 positions).
21