IKEA Hygienisk Bedienungsanleitung Seite 13

ENGLISH
German degrees
(°dH)
11 - 14
4 - 10
<4
1) Factory setting.
2) Do not use salt at this level.
Whether you use a standard detergent or
multi-tabs (with or without salt), set the
proper water hardness level to keep the
salt refill indicator active.
Multi-tabs containing salt are not
effective enough to soften hard
water.
How to set the water softener level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
the indicators
and flash and the display is
blank.
2. Press .
• The indicators
and
• The indicator
• The display shows the current setting:
e.g. = level 5.
3. Press repeatedly to change the
setting.
4. Press the on/off button to confirm the
setting.
The rinse aid dispenser
The rinse aid helps to dry the dishes without
streaks and stains.
French degrees
(°fH)
19 - 25
7 - 18
<7
and until
, , ,
, ,
are off.
still flashes.
mmol/l Clarke de-
1.9 - 2.5
0.7 - 1.8
<0.7
The rinse aid is automatically released
during the hot rinse phase.
You can set the released quantity of rinse
aid between level 1 (minimum quantity) and
level 6 (maximum quantity). Level 0 will
deactivate the rinse aid dispenser and no
rinse aid will be released.
Factory setting: level 4.
How to set the rinse aid level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
,
the indicators
and
display is blank.
2. Press
,
• The indicators
• The indicator
flash.
• The display shows the current setting:
e.g.
– The levels of rinse aid range from
3. Press
setting.
4. Press on/off to confirm the setting.
Water softener level
grees
13 - 17
5 - 12
< 5
and
, ,
start flashing and the
.
,
are off.
continues to
= level 4.
0A to 6A where level 0A means
rinse aid is not used.
repeatedly to change the
13
3
2
2)
1
until
, ,
, , and