Metabo KS 66 Plus Originalbetriebsanleitung Seite 19

T = max. depth of cut (45°)
45°
A = Adjustable diagonal cut angle
D = Saw blade diameter
d = Saw blade drill diameter
a = Max. base body thickness of saw
blade
b = Cutting width of saw blade
c = Thickness of splitting wedge
m = Weight
Vibration total value (vector sum of three
directions) determined in accordance with EN
60745:
a = Vibration emission value
h, D
(Sawing chip board)
K = Uncertainty (vibration)
h,D
The vibration emission level given in this informa-
tion sheet has been measured in accordance with
a standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with different
accessories or poorly maintained, the vibration
emission may differ. This may significantly
increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not
actually doing the job. This may significantly
reduce the exposure level over the total working
period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
Typical A-effective perceived sound levels:
= Sound pressure level
L
pA
L = Acoustic power level
WA
K , K = Uncertainty (noise level)
pA WA
Wear ear protectors!
Measured values determined in conformity with
EN 60745.
* Energy-rich, high-frequency interference can
cause fluctuations in speed. The fluctuations
disappear, however, as soon as the interference
fades away.
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
ENGLISH
ENG
19