Suntec Pump Details - baltur TBML 80 ME Bedienungsanleitung

SUNTEC PUMP DETAILS

AJ4 - AJ6
AN 47 - 57 - 67 - 77 - 97
2 PRESSURE GAUGE CONNECTOR AND AIR VENT (1/8" G)
3 PRESSURE ADJUSTING SCREW
3.1. REMOVE THE NUT TO HAVE ACCESS TO THE PRESSURE
ADJUSTING SCREW (AN.. 11-14 BAR, AJ..11-16 BAR)
4 RETURN
4.1 RETURN WITH INNER BY-PASS DOWEL
5 SUCTION
6 DELIVERY
7 VACUUM GAUGE CONNECTOR (1/8" G)
7.1 VACUUM GAUGE CONNECTOR AND INTERNAL BY-PASS
DOWEL
NOTE: The pump is pre-adjusted to a pressure of 12 bar.
14 / 36
0006160035_201408