Gas Supply Line - baltur TBML 80 ME Bedienungsanleitung

GAS SUPPLY LINE

The basic diagram of the gas supply line is shown in the
figure below. The gas train is certified in accordance with
EN 676 Standard and is supplied separately from the burner.
A manual shut-off valve and an anti-vibration joint must be
installed upstream of the gas valve, as shown in the diagram.
BASIC DIAGRAM OF THE GAS BURNER
1) Manual shut-off valve
2) Anti-vibration joint
3) Gas filter
4) Minimum gas pressure switch
5) Safety valve
6) Pressure regulator
7) Valve tightness control device
8) Main valve
GAS TRAIN SUPPLIED BY THE MANUFACTURER
9) Air adjustment servomotor
10) Air adjustment gate
11) Air pressure switch
12) Combustion head
13) Gas adjustment throttle
14) Gas adjustment servomotor
10 / 36
0006160035_201408
RESPONSIBILITY OF THE INSTALLER