Werbung
AS/NZ 2063:20089
Warnings and Standards
1. NO HELMET CAN PROTECT THE WEARER AGAINST ALL
POSSIBLE IMPACTS.
2. THE HELMET IS DESIGNED TO BE RETAINED BY A STRAP
UNDER THE LOWER JAW.
3. TO BE EFFECTIVE, A HELMET MUST FIT AND BE WORN
CORRECTLY. TO CHECK FOR CORRECT FIT, PLACE HELMET
ON HEAD AND MAKE ANY ADJUSTMENTS INDICATED.
SECURELY FASTEN RETENTION SYSTEM. GRASP THE
HELMET AND TRY TO ROTATE IT TO THE FRONT AND REAR.
A CORRECTLY FITTED HELMET SHOULD BE COMFORTABLE
AND SHOULD NOT MOVE FORWARD TO OBSCURE VISION
OR REARWARD TO EXPOSE THE FOREHEAD.
4. NO ATTACHMENTS SHOULD BE MADE TO THE HELMET
EXCEPT THOSE RECOMMENDED BY THE HELMET MANUFACTURER.
40
5. THE HELMET IS DESIGNED TO ABSORB SHOCK BY PARTIAL
DESTRUCTION OF THE SHELL AND LINER. THIS DAMAGE
MAY NOT BE VISIBLE. THEREFORE, IF SUBJECTED TO A
SEVERE BLOW, THE HELMET SHOULD BE DESTROYED AND
REPLACED EVEN IF IT APPEARS UNDAMAGED.
6. THE HELMET MAY BE DAMAGED AND RENDERED INEFFECTIVE
BY PETROLEUM AND PETROLEUM PRODUCTS, CLEANING
AGENTS, PAINTS, ADHESIVES AND THE LIKE, WITHOUT THE
DAMAGE BEING VISIBLE TO THE USER.
7. A HELMET HAS A LIMITED LIFESPAN IN USE AND SHOULD
BE REPLACED WHEN IT SHOWS OBVIOUS SIGNS OF WEAR.
8. THIS HELMET SHOULD NOT BE USED BY CHILDREN WHILE
CLIMBING OR DOING OTHER ACTIVITIES WHERE THERE IS A
RISK OF HANGING OR STRANGULATION IF THE CHILD GETS
TRAPPED WHILE STILL WEARING THE HELMET.
41
Werbung
