Herunterladen Diese Seite drucken

BestWater JUNGBRUNNEN 22-00 ULTIMATE Gebrauchsanleitung Seite 20

Vorschau ausblenden Andere Handbücher für JUNGBRUNNEN 22-00 ULTIMATE:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Safety
En
Permitted use
Do not store your BestWater sys-
tem in places exposed to frost. Ho-
ses can freeze, system parts can
crack or break, and the reliability of
the system can be impaired by tem-
peratures below freezing.
Close the corner valve in cases of
long absence (e.g. holiday).
Overflow risk! Examine the drain
while operating the BestWater sys-
tem to see whether the water is
draining quickly enough. Secure the
drain hose from sliding out with a
fastening ring.
The kick-back of the outflowing wa-
ter when rinsing can push the unse-
cured or improperly fastened hose
out of the clamp!
Never clean the BestWater system
with
solvent-containing
cleaners
(e.g. benzine). These can damage
system parts and contaminate the
system with toxic fumes. Risk of fire
and explosion!
Supplies
Supply parts may only be installed
if they have been explicitly appro-
ved by BestWater. The installation
of other parts rules out warranty,
guarantee, and/or product liability
claims.
38
BestWater
cannot be held liable for damages
caused as a result of non-adherence
to the safety requirements and
warnings.
First steps
Determine where you will install the
water filtration system and faucet.
The faucet should be easily acces-
sible and simple to use.
The plastic hoses should have a
simple pathway (risk of buckling).
The water filtration system and
der water stopper on the corner val-
ve should be easily visible and usa-
ble upon installation.
Conduct a trial installation in which
all of the elements are placed in
their intended positions.
Install the unit as described on the
following pages. The necessary con-
nections are, in order:
Faucet
Drain clamp
Water stopper
Water line
Water filter
Stored pressure tank
Setting Up and Connecting
Connect the assembled connections
with the water filtration system. Be-
gin using the water filtration system.
Tools and materials
You will require the following tools
and materials to install the water fil-
tration system:
Drill
Drill bits: 3 mm, 7 mm and
12 mm
Screwdriver (Phillips-tip)
Sockets, box wrench: 14 or
17 mm
File
When
washing
stone
(marble,
granite, etc.) please adhere to the
pertinent drilling requirements.
Use specialty tools should additional
work be required.
En
39

Werbung

loading