Troubleshooting
No water exiting from nozzle
Fill up fresh water reservoir.
Fresh water container sieve plugged.
Thermal protection switch has switched
off the pump as it was overheated.
Switch off appliance and let it cool down
(approx. 20 - 30 min).
Detergent pump defective, contact Cus-
tomer Service.
Spray stream uneven
Clean the spray nozzle of the wash noz-
zle.
Insufficient vacuum performance
Close the surrounding air separator at
the handle.
Accessories, suction hose or suction
tubes are clogged, please remove the
obstruction.
Filter bag is full, insert a new filter bag
(for the order no. please see the spare
parts list at the end of the present in-
structions).
Flat fold filter is contaminated, use filter
cleaning mechanism, remove the flat
fold filter if heavily soiled and clean it
(see chapter "Cleaning flat fold filter").
Detergent pump noisy
Fill up fresh water reservoir.
Strong foam generation in the con-
tainer
Use the correct detergent from KÄRCH-
ER.
Appliance is not running
Plug in the main plug.
Technical specifications
Voltage
1~50/60 Hz
Output P
nom
Output P
max
Mains fuse (slow-
blow)
Sound pressure level
(EN 60704-2-1)
Weight (without ac-
cessories)
Subject to technical modifications!
Special accessories
Filter set (5 pc.)
Flat fold filter
Washer nozzle for cleaning
upholstery
Carpet cleaner RM 519
(1 l bottle)
International
Textile waterproofing-agent
Care Tex RM 762
(0.5 l bottle)
International
– 11
EN
220 - 240 V
1200
W
1400
W
10
A
77
dB(A)
7,1
kg
Order No.
6.904-143.0
6.414-498.0
2.885-018.0
6.295-771.0
6.295-769.0
19