Description Of The Appliance; Dry Vacuum Cleaning - Kärcher VC 1800 Originalbetriebsanleitung

Operation

Description of the Appliance

Illustrations on fold-out page!
Illustration
1 Suction hose connection
2 Slide for the regulation of the blowing
function
3 Blowing connection
4 Carrying handle
5 Cable hook
6 ON/OFF switch
Position I: Suction or blowing
Position 0: Appliance is switched off
7 Storage for suction tubes and accesso-
ries
8 Container closure
9 Swivel casters
10 Textile filter
11 Filter basket
12 Foam filter
(already installed in the appliance)
13 Suction hose
14 Suction tubes 2 x 0.5 m
15 Upholstery nozzle
16 Crevice nozzle
17 Floor nozzle, reversible
Electronic Protection
The vacuum cleaner is protected against
static charge of the container.
10
Illustration
 Rotate both container lids by 180°.
 Remove the motor casing and take ac-
cessories out of the container.
Illustration
 Turn the container, press in the swivel
casters in the openings at the base of
the container till the end-point.
Illustration
 Install the textile filter on the filter bas-
ket.
 Insert the filter basket with the textile fil-
ter.
Illustration
 Put the appliance head onto the con-
tainer and lock the container locks.
Illustration
 Slide the suction hose into the connec-
tion, it will lock into place.
 Connect accessories.
Illustration
 Connect the mains plug and turn on the
appliance.

Dry vacuum cleaning

Always operate the vacuum cleaner
with the filter basket, textile filter and
foam filter installed!
Illustration
Vacuuming hard surfaces:
 Use your foot to press the reversing
switch of the floor nozzle. The brush
strips at the bottom of the floor nozzle
are extended.
Illustration
Vacuuming carpeted floors:
 Use your foot to press the reversing
switch of the floor nozzle. The brush
strips at the bottom of the floor nozzle
are retracted.
– 2
EN
Start up