Tietzsch MultiSafe DSP HS36 Bedienungsanleitung Seite 17

6. Transportation and modification
6.1 Change test electrodes
The MultiSafe DSP HS36 can be equipped with different test electrodes. Those can be easily screwed onto
the high-tension test probes. After this, perform the self-test!
Design of electrodes
The following test electrodes are available
for the MultiSafe DSP HS36:
i = semicircular electrode (standard)
G = peaked electrode with M5-thread
i G Y
Y = bifurcated electrode
6.2 Transportion
The MultiSafe DSP HS36 can be demounted for transportation.
Turn the test probe and the basic pipe counterclockwise.
After about 4 turns you can pull the test electrode from the basic pipe.
For safe transport fix the universal clip at the ball point.
Note:
The device may only be used when completely mounted and
after successfully performed self-test.
16