Defrosting; Replacing Of The Illuminant - Pkm KS 135.0 A++T3 Bedienungsanleitung

1. Clean the shelves and the inside with warm water and a mild detergent.
2. Use clear water to rinse.
3. Dry the cleaned surfaces with a cloth.
4. Check the water drain and clean it if needed.
 Clean with warm water and a mild, non- acidic detergent. Do not restart the
appliance until the door seals have dried completely.
 Clean the drain hole at the back of the cooling
compartment periodically; otherwise defrost water can get
into the cooling compartment. Use a suitable device such
as a pipe cleaner.

5.1 Defrosting

1. The cooling compartment is equipped with an automatic defrost-system.
2. The water is drained at the back inside the appliance
3. The water is collected in a container underneath the compressor. The water
evaporates in this container
4. The drain must not be blocked.
5. Clean the drain carefully with a pipe cleaner.

5.2 Replacing of the illuminant

WARNING! The LED-illuminant must be replaced by a competent
person only. If the LED-illuminant is damaged, please contact a qualified
professional.
depending on model
13
I
NTERNAL CLEANING
D
OOR SEALS
D
RAIN HOLE
C
OOLING COMPARTMENT
64
:
:
:
:
13 .