3
S
CREWS
4
U
PPER HINGE
5
B
RACKET OF THE HINGE AXIS
6
T
OP OF THE APPLIANCE
4. Open the door slightly. Lift the door and remove it carefully.
5. Unscrew the adjustable feet on both sides of the appliance.
6. Unscrew the right bottom hinge bracket (7) and remove it (s. fig. below).
7
B
OTTOM HINGE BRACKET
7. The tilt protection must not be installed on the same side as the hinges.
If you have installed the tilt protection, it may be necessary to reinstall it to
the opposite side of the hinges (s. chapter 3.4 I
PROTECTION
).
NSTALLATION OF THE TILT
53