Preparatory Measures - Pkm KS 135.0 A++T3 Bedienungsanleitung

 Empty the appliance.
 Remove all door trays, glass shelves and drawers from the fridge (s. chapter
4.4.1 G
LASS SHELVES
damaged.
 It is necessary to tilt the appliance backwards while installing the tilt protection.
You should rest the appliance on something solid so it will not slip while
installing the tilt protection.
 Do not tilt the appliance more than 45
 Do not lay the appliance flat as this can damage the cooling system.
1. Tilt the appliance. Do not tilt the appliance more than 45
2. In the bottom of the door of the fridge (A) there is a screw hole (s. fig below).
A
B
OTTOM OF THE DOOR INCL
3. Insert the relevant screw (C) into the hole in the tilt protection (B) (s. fig
below).
P
REPARATORY MEASURES
and chapter 4.4.2 D
I
NSTALLATION OF THE TILT PROTECTION
:
OOR TRAYS
.
0
.
SCREW HOLE
49
) so that they cannot be
:
0 .