11. Install the bracket of the hinge axis (5), align the upper hinge (4) to the left side
properly and screw it tightly. Also screw the opposite side of the bracket tightly
(s. fig. below). Ensure that the door is fixed safely and properly by the hinges.
4
U
PPER HINGE
5
B
RACKET OF THE HINGE AXIS
6
T
OP OF THE APPLIANCE
12. Install the top cover (1) and screw it on the back of the appliance (2) tightly
again (s. fig. below).
1
T
OP COVER OF THE APPLIANCE
2
S
CREWS
NOTICE! Adjust the door properly. The seal must close properly.
55