Mettler Toledo PS7 Bedienungsanleitung Seite 28

Paint Scale PS7, PS7-X
28
Scale line PS7-X
We declare with sole responsibility that the product to which this declaration relates conforms with the EU directives
stated below.
Note: EU pattern approval has been obtained for certified scales. The year of first certification is shown adjacent to the
CE marking. Such scales are certified at the factory and bear the mark «M» on the instrument itself and on the packaging.
If the letter M appears on a solid ground, the scale may be used immediately. If the ground is broken and hatched,
the scale must be certified locally at the place of use by the certified METTLER TOLEDO Service. If the national regulations
of individual countries limit the period of validity of the certification, the operator of such a scale is responsible for its
timely recertification.
Marking
0032
FM
APPROVED
ia
0032
0032
Mettler-Toledo GmbH
Industrial BA IND-N
Nänikon, May 2001
USA
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to both Part 15 of the FCC
Rules and the radio interference regulations of the Canadian Department of Communications. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his own expense.
Canada
ICES-001 Notice for Industrial, Scientific and Medical Radio Frequency Generators: This ISM apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations. Please note that this requirement is only for generators which operate at over
10 kHz.
Avis de l'ICES-001, générateurs de radiofréquences dans le domaine industriel, scientifique et médical: Cet appareil ISM (industriel,
scientifique et médical) satisfait à toutes les exigences définies par la réglementation canadienne en matière d'équipements générant
des perturbations radioélectriques. Veuillez noter qu'il s'agit d'une exigence concernant uniquement les générateurs fonctionnant au-
delà de 10 kHz.
EU directive
94/9/EEC (ATEX)
73/23EEC low voltage
89/336EEC EMC
Johannes Schmid
General Manager
Standard Industrial
Tested to standard
EN50014, EN50020
FMRC 3600, 3610, 3810
CSA-C22.2 No. 157-92
CSA-C22.2 No. 142-M 1987
EN60950-1
EN61326-1 Emission Cl. B
EN61000-3-2 Harmonic Oscillations
EN61000-3-3 Voltage Fluctuations
EN61326-1 Immunity (Industrial)
AS/NZS2064.1/2, AS/NZS3548
AS/NZS4251.1, AS/NZS4252.1
Marlise Ackermann
Project Manager
Product Area General Weighing