Master Mode - Mettler Toledo PS7 Bedienungsanleitung

Paint Scale PS7, PS7-X
22
6

Master Mode

In Master Mode, the settings of the scale can be changed and functions can be activated.
6.1 Calling up Master Mode
M.A.S.t.E.r
Unit
Menu
M.A.S.C.A.L
+
Yes
6.2 The menus of Master Mode
To operate Master Mode: confirm option with «Yes», reject option with «No».
Display/Settings
CAL
SCALE
rESolu
0. 1 0. 1 0. 1 0. 1 0. 1
0.05
Unit
g
oz
P
b.Light
On On On
On On
Off
rEStAr
On
Off Off
Off Off Off
VibrAt
MEd MEd MEd MEd MEd
HIGH
LOW
ProcES
UNIVEr
dOSING dOSING dOSING dOSING dOSING
rESEt
Std On
End SC
In weighing mode, press the «Menu» key and hold it down
until the display shown at left appears.
Within 3 seconds, press the «Yes» key (otherwise the scale
returns to weighing mode). The first menu block of Master
mode then appears.
Function/Notes
Calibrate scale (see Section 6.3, not available on certified scales)
Scale settings
Select resolution (not available on certified scales)
"Full Range" 0 ... 7100 g / 0.1 g (factory setting)
"Delta Range" 0 ... 999.95 g / 0.05 g, 1000 ... 7100 g / 0.1 g
Select weighing unit (not available on certified scales)
Gram (factory setting)
Ounce
Parts (1 part = 1/32 oz)
Switch display lighting on/off
Switched on (factory setting)
Switched off
Switch automatic memory function on/off (not available on certified scales)
Switched on
Switched off (factory setting)
Select vibration adapter
Normal weighing substances (factory setting)
Unstable environment
Very stable environment
Select process adapter
Normal weighing substances
Dosing, e.g. liquid or powder weighing substances (factory setting)
Reset all SCALE settings to the factory settings
Reset to factory settings with «Yes», reject with «No»
Quit "SCALE" block with «Yes»