Herunterladen Inhalt Inhalt Diese Seite drucken

Silvercrest SKM 550 EDS A1 Bedienungsanleitung Seite 7

Vorschau ausblenden Andere Handbücher für SKM 550 EDS A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

• Press the unlocking button
h
arm
into operating position 4 (see chapter
„Operating positions") (Fig.
• Insert the mixing bowl
y
bowl
must engage in the recesses
appliance.
• Press the unlocking button
h
arm
into operating position 1 (Fig.
• Place and hold turn switch
j
the drive motor
position (Fig.
). Should the drive motor not
move it is already at the park position.
• Press the unlocking button
h
arm
into operating position 4 (Fig.
• Depending on the task to be performed, insert
the kneading hooks
so that they firmly engage in the drive
Note: The kneading hooks
pastry deflector. Turn the pastry deflector until
the kneading hooks
• Place the ingredients to be processed into the
y
mixing bowl
.
Note: Pay heed that during the kneading
and/or mixing process the pastry in the mixing
bowl increases in volume, or is pressed upwards
through the rotary movement. Take note of the
table in the chapter „Recommended filling
quantities".
• Press the unlocking button
h
swivel arm
to just before operating position 1
(see chapter "Operating positions") (Fig.
but do not allow it to engage.
• Slide the lid onto the mixing bowl
• Move the swivel arm
operating position 1 and let it engage, so that
the lid is firmly seated.
f
and bring the swivel
).
y
. The base of the mixing
k
on the
f
and bring the swivel
).
g
in position P, until
remains stationary in the park
f
and bring the swivel
).
q
w
, beaters
or whisks
j
q
are fitted with a
q
can engage (Fig.
f
down and bring the
y
.
h
the final distance to
• Set the rotary switch
Risk of injury from rotating parts!
NEVER reach into the mixing bowl
Only change accessories when the drive motor
is at standstill! After being switched off, the drive motor
j
continues to run for a short time. The appliance
may only be used when the drive openings not
being utilised are covered with drive protection lids.
In cases of malfunction switch the appliance off and
remove the plug from the wall socket, this will avoid
an unintentional switching on of the appliance.
Refilling with ingredients
e
• Turn the appliance off with the rotary switch
motor.
• Turn the rotary switch
until the drive motor
(Fig.
• Press the unlocking button
).
the swivel arm
• Remove the lid.
• Press the unlocking button
the swivel arm
• Fill with ingredients.
On task completion
• Turn the appliance off with the rotary switch
• Turn the rotary switch
until the drive motor
(Fig.
• Press the unlocking button
the swivel arm
• Remove the lid.
),
• Press the unlocking button
the swivel arm
• Remove the accessories from the drive motor
• Remove the mixing bowl
• Clean all parts (see chapter "Cleaning and care").
- 5 -
g
to the desired level.
g
to P and hold it firmly
j
comes to a standstill
).
f
h
a little.
f
h
into operating position 5.
g
to P and hold it firmly
j
comes to a standstill
).
f
h
a little.
f
down and bring
h
into operating position 4.
y
.
y
when it is in use.
j
g
.
down and raise
down and bring
g
.
down and raise
j
.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis