Technical Data - Würth 5714 200 Serie Originalbetriebsanleitung

Intended use
This device must only be used for grinding, sanding,
for work with wire brushes and for abasive cutting-
off of metal, concrete, stone and similar materials
without the use of water. The device must only be
operated using compressed air. The device is not
suitable for use as a lever, breaking or striking tool.
The device is designed for use with genuine Würth
system accessories.
Any other use or use outside this scope is considered
improper use.
The user alone is responsible for damage
resulting from improper use.
Symbols on the device
Symbol
WARNING
20
Meaning
Read the operating instruc-
tions!
Direction of rotation of the
tool
Wear suitable ear protec-
tors!
Wear protective glasses.
Device elements
Overview (Fig. I/II/III)
1 Abrasive wheel
2 Spindle locking knob
3 Handle
4 Compressed air connection
5 On/Off switch
6 On/Off switch lock
7 Protective guard adjustment
8 Protective guard
9 Hose connector (Würth system accessory)
10 Hose clamp (Würth system accessory)
11 Compressed air hose (Würth system accessory)
12 Support flange

Technical Data

Art.
Suitable for cut-off wheels
Wheel mounting
Idle speed
Power
Average air consumption
Min. hose diameter
Operating pressure (max.)
Weight
5714 200 X
100 x 1 x 10 mm
10 mm
14,000
rpm
700 watt
113 l/min
9 mm
6.3 bar
1.7 kg