Mounting Or Removing Of Headrest; Adjusting The Pushing Handgrips - Vermeiren EZ1 Gebrauchsanweisung

1
2
2.8

Mounting or removing of headrest

L L L L
CAUTION:
Risk of injury – Check that the headrest is firmly fixated before using
your wheelchair.
1
2.9

Adjusting the pushing handgrips

L L L L
CAUTION:
Risk of injury – Check that the pushing handgrips are firmly fixated
before using your wheelchair.
L L L L
CAUTION:
Risk of tipping over the wheelchair – Respect the maximum height
adjustment otherwise the stability of the wheelchair is at a risk. Use only the last
limitation of the pushing handgrips tubes.
The backrest of the wheelchair can be mounted
by following instructions.
1. Mount the backrest into the four brackets
2. Turn on the upper star buttons to lock the star
buttons by hand.
3. Check that the back is firmly fixated.
1
To remove the backrest of the wheelchair:
1. Loosen the upper star buttons.
2
2. Pull the backrest upwards out the four
brackets
The headrest of the wheelchair can be mounted
by following instructions.
1. Mount the headrest into the tube
2. Turn on the star button
button by hand.
3. Check that the headrest is firmly fixated.
To remove the headrest of the wheelchair:
1. Loosen the star button
2
2. Pull the headrest upwards out the tube
Page 9
+ .
+ .
to lock the star
.
EZ1
2012-12
.
.