Hama EWS-870 Bedienungsanleitung Seite 9

Anzeige Funksymbol
Flashing display
Constant display
No display
Note – Time settings
• If, during initial setup of the device, a DCF radio signal is not received within the first few
minutes, the search is aborted. The radio symbol disappears.
• If there are reception problems, we recommend leaving the clock to sit overnight, since
interference is generally less at night.
• In the meantime, you can start a manual search for the DCF radio signal at another location or
you can manually set the time and date.
• The clock automatically continues to search for the DCF radio signal on a daily basis (2:00
a.m., 8:00 a.m., 2:00 p.m. and 8:00 p.m.). If the signal is received successfully, the manually
set time and date are overwritten.
• Press the RCC button (16) to start the manual search for the DCF radio signal.
Note – Manual search
• The manual search is automatically aborted after 6-16 minutes.
• Using the RCC button (16) frequently will drain the battery. We recommend only using this
function to seek out an optimal location for the device.
Note – Summer time
• The clock automatically switches to summer time.
summer time is activated.
8
Searching for the DCF signal
Active
Successful – signal is being received
Error – signal search ended
appears on the display as long as
DST