Hama EWS-870 Bedienungsanleitung Seite 3

G Operating instruction
Controls and Displays
A Base station
1. Time
2. Channel display
3. Alarm symbol
4. Radio symbol
5. Measuring station radio symbol
6. Outdoor temperature
7. Room temperature
8. SNOOZE/LIGHT button
= stop the alarm/activate the backlight (approx. 5 seconds)
9. ALARM SET button
= display/set alarm mode
10. CH+ button
= select channel/increase the current set value
11. °C/°F slide switch
= switch between °C and °F
12. SENSOR button
= manual search for a signal from the measuring station
13. DISPLAY SET button
= settings/confirm the set value
14. MEM– button
= access the saved maximum/minimum values/reduce of the current set value
15. RESET button
= restore factory settings
16. RCC button
= activate/deactivate manual radio signal reception
17. Battery compartment
B Measuring station
18. Transmission indicator lamp
19. Opening for wall mounting
20. RESET button = restore factory settings
21. CH slide switch = channel selection
22. Battery compartment
2