Hama EWS-870 Bedienungsanleitung Seite 12

Note – Replacing the batteries
• Note that the stations have to be resynchronised each time after you change the batteries in
the measuring or base station.
• To do this, remove the batteries from the other station and then reinsert them, or change them
as required.
6.8. Reset
• If displays/transmissions continually fail to appear or are incorrect, use a pointed object (paper
clip, etc.) to press the RESET button (15) on the base station and the RESET button (20) on the
measuring station to carry out a restart.
• The base station returns to the factory settings and all stored information is lost.
7. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning
agents. Make sure that water does not get into the product.
8. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from
improper installation/mounting, improper use of the product or from failure to observe the operating
instructions and/or safety notes.
9. Service and Support
Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
11