Hama EWS-870 Bedienungsanleitung Seite 5

• Keep the packaging material out of the reach of children due to the risk of suffocation.
• Dispose of packaging material immediately according to locally applicable regulations.
• Do not modify the product in any way. Doing so voids the warranty.
Warning – Batteries
• Immediately remove and dispose of dead batteries from the product.
• Only use batteries (or rechargeable batteries) that match the specified type.
• Do not mix old and new batteries or batteries of a different type or make.
• When inserting batteries, note the correct polarity (+ and - markings) and insert
the batteries accordingly. Failure to do so could result in the batteries leaking or exploding.
• Do not charge batteries.
• Keep batteries out of the reach of children.
• Do not short circuit the batteries/rechargeable batteries and keep them away from uncoated
metal objects.
4. Getting Started
4.1. Measuring station
• Open the battery compartment (22) and insert two AA batteries with the correct polarity.
• Move the CH slide switch (21) to the left or right to select the channel on which the measuring
station transmits.
• Once the channel is assigned to one transmitter, you can only change it by removing the batteries
or resetting the unit.
• Close the battery compartment.
Note
Before use, ensure you insert the batteries in the measuring station first and then in the base
station.
4.2. Base station
• Remove the screen protector from the display.
• Open the battery compartment (17) and insert two AA batteries with the correct polarity.
4